Autoterm Comfort Controller 2021 Model
Autoterm Comfort Controller (NEW 2021 Model)
The long awaited Comfort Controller is now fully available and ready to transform your Diesel Heater User Experience. If you have found the standard PU-27 controller difficult to navigate, then this is the solution for your needs.
If you already have a Planar diesel heater fitted, you may be able to upgrade your controller. This will enable a variety of added functionality and settings alongside a whole new user experience.
Fitting the new controller is a 10 minute job and directly replaces your existing diesel heater control unit. It can be done at home or alternatively if you’d like us to fit it for you, please get in touch today.
Works for the 2D, 4D and Flow 12v only.
Our air & liquid heaters now have a new control panel that will help to control your Autoterm heater more conveniently and most easily.
What does the Comfort Control bring to the game:
- Intuitive user interface
- LED status display
- Thermostat function
- Additional heating options
- Quick access button for heating
- Vehicle battery safety function
- Heater maintenance reminder
- Precise integrated digital temperature sensor
Heating modes for air heaters
Heater will maintain set temperature by reducing the heating power, without shutting off the combustion process.
Heater will operate constantly at set power level.
HEAT + VENTILATION:
Heater will operate till the temperature is reached 1°C above the set temperature, shut off the combustion process and start to ventilate till the temperature drops 5°C below the set temperature. When temperature drops, heating starts again.
Heater will operate till the specified temperature is reached then shuts off the combustion process and ventilation. After the temperature drops by specified degrees heating will start again.
Heating modes for liquid heaters
Heater will operate till the certain coolant temperature is reached then shuts off the combustion process. After the temperature of the coolant drops heating will start again.
(only for FLOW 14D)
Pre-heating mode with reduced power and fuel consumption. Temperature of the coolant is reached slower than in “Pre-heating mode.”
(only for Flow 5)
Heater will operate till the specified interior temperature is reached then shuts off the combustion process. After the temperature drops by specified degrees heating will start again. Temperature is read by control panel.
*for setting up “Thermostat mode” see instructions for AIR heaters.
Custom calibrated digital sensor with +/- 1.5 degree offset.
Max – 3 timers.
Heating mode can be chosen for each timer.
All 3 timers can be active simultaneously.
Set timer is active continuously till disabled
ED – Everyday
EW – Every workday
LED red – heating
LED blue – ventilation
LED green – shutting down
Display dimensions (mm)
37 x 20
Control panel dimensions (mm)
82 x 37 x 19